TP-Link 외부접속 / DHCP 활성화방법
DHCP 활성화 방법
Network -> DHCPServer -> Status : Enable 체크
외부 Remote 활성화
System Tools -> Admin Setup -> Remote Management -> Add
Subnet : 0.0.0.0 / 0 입력
이후 공인ip로 접근시 해당 공유기에 접근할수 있습니다.
공식 메뉴얼
https://www.tp-link.com/us/support/faq/66/
How do I configure Remote Management for my TP-Link Wireless Router? | TP-Link
How do I configure Remote Management for my TP-Link Wireless Router? Step 1 Open the web browser and in the address bar type in: http://192.168.1.1 or http://192.168.0.1 or http://tplinklogin.net Then press Enter. Note: The LAN IP is vary by model. Please
www.tp-link.com
전체 문서 메뉴얼
https://www.tp-link.com/kr/support/download/tl-er6020/v1/
다운로드 함 TL-ER6020 | TP-Link 대한민국
TP Link - Download Center Detail
www.tp-link.com
세부설정 옵션 메뉴얼
configuring_network
VLAN Add the WAN port to a VLAN. Generally, you don’t need to manually configure it unless required by your ISP. By default, the WAN port is automatically assigned to a VLAN, and the egress rule of the VLAN is UNTAG, so the packets are transmitted by the
www.tp-link.com